Total Living Area: | 2110 sq ft |
Main Living Area: | 2110 sq ft |
Garage Area: | 576 sq ft |
Garage Type: | Attached |
Garage Bays: | 2 |
Foundation Types: | Basement - * $519.00 Total Living Area may increase with Basement Foundation option. Crawlspace Slab |
Exterior Walls: | 2x6 |
House Width: | 64'6 |
House Depth: | 75'0 |
Number of Stories: | 1 |
Bedrooms: | 3 |
Full Baths: | 2 |
Half Baths: | 1 |
Max Ridge Height: | 16'0 from Front Door Floor Level |
Primary Roof Pitch: | 1:12 |
Roof Load: | 25 psf |
Roof Framing: | Stick |
Porch: | 47 sq ft |
FirePlace: | Yes |
Main Ceiling Height: | 9' |
View an actual, LIVE cost report. This report is for demo purposes only. Not plan specific.
A: Thanks for the question - we measure sqft to exterior walls, per industry standard. To help answer your question - "what am I missing?" - I notice in your estimations that you guess 30x20 for the living room wing, but the living/dining alone is 27'-2", without the kitchen. Thats actually a 10ft discrepancy, its actually 40x20 including the kitchen. For your 40x25 estimate of the second wing, the Master Bedroom (20ft) and two 11ft bedrooms already exceeds the 40ft estimate without including the bathroom or the bedroom closets that are between the bedrooms (or the walls).... I think those are what threw you off. The Foyer is 6' x 8', just for added info. If you adjusted your estimates to 40x20, 50x25, and 6x8, you'd be much closer to the calculated total. Hope that helps clarify where the calculation comes from
A: The roof pitch is 1/12 and the roof is a metal/standing seam roof.
A: All of our plans are designed for 25lbs of snow.
A: The ceiling in the great room vaults from 11' at the kitchen to 14'-5" at the left end of the great room. (5) 5-1/8"x16-1/2" 32' in length GluLam Beams spaced 8'-0" +/- run front to back and are exposed. Engineered rafters are 14" for a 25 psf snow load. The same roof/ceiling framing elements are specified throughout the house. Ducts run through the crawlspace. Hopefully, this information is helpful.
A: The plans call for horizontal lap siding, and stone veneer. The roof is "Standing seam metal roof".
A: Good Afternoon The stone on the fireplace is stone veneer. The outside siding is horizontal lap siding. The headers are just any sort of trim work that you choose. It could be hardie trim or cedar trim. Roof is a standing seam metal roof. . Hope that helps.
A: This is what our IT person said about your customer's question: https://www.chiefarchitect.com/support/article/KB-00170/using-cad-to-walls-from-an-imported-dwg-dxf.html As that page indicates, the customer would import our 2D drawings/line work for reference, and then use Chief Architect’s 3D tools to create a 3D version of them, so it is going to require a certain level of proficiency on the part of the end-user with that software. The dwg file format from AutoCAD is compatible, though. We could always send them a test drawing in advance; like maybe a single page of the CAD file, for example.
A: Hello - The kitchen is not included in the living/dining room. The kitchen is measured from the edge of the island to the back wall of the oven at 13'11". The depth is from the back wall of the stove to the edge of the oven wall 11'6". These dimensions are approximate. Thank you
A: Hello - When we do have interior photos of our plans we showcase those on our website. Unfortunately, for this plan we do not. Thank you!
A: If you would like to purchase the multi-use license, you would need to purchase the CAD file which is $2,682. That would allow you to build the home as many times as you need. We also include PDF's along with the CAD drawings.
A: We don't have any interior photos of this house. The HVAC is located in the garage. We don't typically show that on the renderings.
A: Hello - All of our plans are designed for 25# of snow. You will need to take the plan to a local engineer to have them modify the roof snow load to match what your local area requires. Thank you!
A: All of the doors are 8'.
A: Yes, they are structural. But you could box them in if you don't want them exposed.
A: Hello - The Liv/Din ceiling vaults to 14' 5". The Master bedroom vaults to 11' 1".
A: Yes you can! Please click the "Modifications" tab above to get more information.
A: The national average for a house is running right at $125.00 per SF. You can get more detailed information by clicking the Cost-To-Build tab above. Sorry, but we cannot give cost estimates for garage, multifamily or project plans.
If you find the exact same plan featured on a competitor's web site at a lower price, advertised OR special SALE price, we will beat the competitor's price by 5% of the total, not just 5% of the difference! To take advantage of our guarantee, please call us at 800-482-0464 or email us the website and plan number when you are ready to order. Our guarantee extends up to 4 weeks after your purchase, so you know you can buy now with confidence.
Have any Questions? Please Call 800-482-0464 and our Sales Staff will be able to answer most questions and take your order over the phone. If you prefer to order online click the button below.
Add to cart